24 Volts AC can be connected to either of the board inputs, BUT NOT BOTH

< 24 V AC Input [Customer Supplied ]

< Right Solenoid

< Right Sensor

RIGHT TAKE OFF

< Power is jumpered here so the two units share 24 Volts AC

LEFT TAKE OFF

< 24 V AC Input [Customer Supplied ]

< Left Solenoid

< Left Sensor

 
 

 

PLEASE NOTE: If you are using Touch Sensitive Switch (Westfalia pt.# 4021-0453-000) on the Start/Reset connect the RED wire to Start connection closest to Power connection and the Purple wire to Start connection closest to LED+ connection.
 

* All names and logos are copyright to their respective owners
          Powered by CyberDezign